ISO Nintendo

[smiker]

My Nintendo ^^

Updated down...top...

[Elrinth]

good work!

however.. according to this picture there's a couple of inconsistencies
http://upload.wikimedia.org/wikipedia/commons/8/8a/Nintendo_entertainment_system.jpeg

I'm sure you'll notice them yourself, but here goes. The front of the nes should be flat. the red light is on the wrong side. controller ports are missing (maybe u left them out because it would be very hard to read at such small pixelcount). the groove on the top is the wrong way (or atleast that's what it looks like on my monitor). there's barely noticable space between cartridge-lid and the black stripe, you have too much space.

other than that.. AMAZING! I wuw nes!

[Ed Oscuro]

The front of the nes should be flat.

To clarify, the front face of the dark bottom half of the shell is sloped slightly inwards towards the bottom. The back slopes inwards even more gradually. Both are highly exaggerated here. You can see the angles on the sides of the top shell pretty easily in the Wikipedia picture, so I won't bring that up.

[smiker]

'You can see the angles on the sides of the top shell pretty easily in the Wikipedia picture,'

mmmm....that was my reference ^^
i dont understand you very well Elrinth, you say that is right or that is wrong?

[smiker]

a little update:

[chigsam]

AAH! ITs eating the games!

ya i like it very nice, but under the lid seems a little empty. just plain green?

[nizzate]

looks good but i noticed that on the last few frames the color on the rivets on the top of the nes flicker.  Maybe you changed the color in some of the frames and forgot to change the rest of them.

[smiker]

right there, i have to fill its interior....what do you think about an integrated circuit in there?

nizzate:thanks, i am very off-clues (sorry about this shitty spelling, i'm in hurry) i will fix it tonight. thanks 4 you all 4 the coments!

[Elrinth]

very good progress.. however the stripes on the top of the nes still aren't fixed. the interior on the nes was green? i remember it being black... hmmm..
you should consider a little less bending in on the most left side (on the bottom dark grey part by the red led) on the nes...
you plug the nes controllers into the back of the nes? or you hide the cables VERY well behind it?

anyways, keep up the good work.. looking forward to the completed piece... also try to make the cartridge picture show some well known game like hrrm... metroid? zelda?  (golden cartridge, lol) mario? I know this is REALLY hard at this low resolution, but give it a try and tell us how it went!

[smiker]

yeah you're right i'm going to get at the finish with this piece, i really consider it as a big challenge, an i think that doing it can raise my techniques...
tnx a lot for the comments, i'm very pleased of hearing that advices... sorry if i am having a bad spelling...i simply cant speak better in this moment...hard day today....

edit:

one more thing
for those who they interest to, i have a video of how i've done it today....i spent 1:30 aprox to make it everything without the nes (it took me over 30 min to give it only the lineart, but i didn't record how i drawed it).
i mean animation, pads, try to make the plugs...cartridge....
i'm going to upload to youtube for you can see it, or maybe host it on nsn....later edit will reveal the direction, i you want to see it, be aware over 30 minutes
^^
tnx for all cmnts!

[smiker]

here is another update! hehe i've followed steps you said, i think. note that to me if i am on mistake please:
here is it, guess what game is loaded ^^? i am thinking on make a tv for titile screen of the game hehee what do you think?


here is the video i was saying before...
http://smiker.tripod.com/NesAnimSized.rar
sorry, if you cant get the videos, it's on my videos section on this url:
http://smiker.tripod.com

hope this won't be spam x X

[Elrinth]

don't forget that nes games had the game name tag on the top of them. yeah I'm not very good at guessing, but it's yellow and red.. don't remember any game like that

anyways, awesome work on the controller plugs! <3 the controllers

stripes on the nes still aren't as visible as I'd want them to be, but certainly better than before.
and there's still the skew part on the left which is too much. it doesn't matter how much u try to convince me, it shouldn't be like that

anyways, I'm giving it 8/10 atm. good work, nice progress, and you've learnt alot since u started here

oh, and I would want one of these: http://www.raurusreturn.net/images/stories/newsimages/zeldanes/zeldaII02.jpg

[smiker]

check zelda cartridge if it helps

[smiker]

AAH! ITs eating the games!

ya i like it very nice, but under the lid seems a little empty. just plain green?

do you thing it's now fixed?

everyone:
i need some advice of how to make ventilation slots more readable... x X
also, i would say, elrinth: what do you mean with ...and there's still the skew part on the left which is too much......sorry but i don't understand what are you saying....sorry...can you explain it to me again? sorry for the inconvenience, i'm not english  either american...so english in't my native language, but i think i defend me well...

just a note:
game is zelda...xd it has the nintendo seal, and sketch of red letters (zelda) and the gray shiled, all whitin a dark yellow bg...do you see it now?

[Elrinth]

ummm you the left part of the picture has two slopes, one for the top part and one for the bottom part of the nes. the bottom part needs to be steeper. because from the red led to the edge of the nes there is much more space. you made too much oblique; slanting, sloping, inclined; crooked, skewing on that part.

I'm not sure u'll understand even now. I would edit to something like this.. but not sure:

[smiker]

ive done these two, the nes was revised for correcting (thanks elrinth ^^)
the tv doesn't show the game what it is (zelda x X but it looks ok i think.)

[Elrinth]

awesome-nes
a bit more working on the tv itself... then maybe u can throw these things into a room showing all ur nintendo fan stuff?