You’re standing in the middle of a gutted master bath, tape measure in hand, staring at a five-foot gap in the drywall. Most people—honestly, probably your contractor too—will tell you that a 60-inch space belongs to a double vanity. It’s the standard. It’s what "resale value" demands. But they're usually wrong.
Choosing a single sink bathroom vanity 60 inches wide is a power move for your morning routine.
Think about it. Two sinks in 60 inches means two drains, two P-traps taking up cabinet space, and two people bumping elbows in a cramped "his and hers" setup that feels more like a shared locker room. When you drop down to one offset sink, you suddenly have three feet of uninterrupted counter space. You have room for a coffee cup, a makeup organizer, and a hair straightener that isn't hovering dangerously over a second basin.
The Countertop Real Estate Game
Space is luxury. In the world of interior design, we often prioritize "features" over "function." We think more sinks equals more value. However, real estate experts like those at Zillow have noted in recent years that while "double vanities" are a popular search term, high-end buyers are increasingly pivoting toward "spa-like" features. A massive slab of Italian Calacatta marble or rugged soapstone looks significantly more expensive when it isn't interrupted by two ceramic holes.
If you go with a single sink bathroom vanity 60 inch layout, you gain what designers call "landing zones."
Most 60-inch double vanities leave you with about 12 to 15 inches of space between the sinks. That’s barely enough for a soap dispenser. By shifting to a single sink—especially one centered or slightly offset—you get massive wings of space. If you’re a "get ready" person who uses a lot of products, this is a game changer. It's the difference between living out of a cluttered drawer and having a clean, organized station.
Storage You Might Actually Use
Let’s talk about the plumbing nightmare.
A double vanity requires two sets of supply lines and two waste pipes. Underneath, those pipes eat the heart out of your storage. You end up with those awkward U-shaped drawers that wrap around the plumbing, or worse, just a big empty cavern where stuff goes to die.
A single sink bathroom vanity 60 setup simplifies everything. You have one central (or side-loaded) plumbing stack. This leaves the rest of the 60-inch footprint wide open for deep, full-extension drawers. Brands like James Martin Vanities or Fairmont Designs often utilize this extra width to include integrated pull-out organizers, hair tool power hubs, and jewelry trays.
You can fit towels. You can fit a bulk pack of toilet paper. You can actually see the back of the cabinet.
The Resale Value Myth
People are terrified of hurting their home's value. "But what if the next buyers have kids?"
Kinda valid, but mostly overblown. According to the National Association of Home Builders (NAHB), the "primary bath" is becoming a sanctuary. Most couples don't actually brush their teeth at the exact same second. They value the feel of the room. A 60-inch single vanity makes a bathroom feel larger because the floor-to-ceiling visual is less cluttered.
It’s about the "luxury hotel" vibe. Have you noticed that high-end boutique hotels often opt for one massive, beautiful sink area rather than two cramped ones? It feels intentional. It feels like a choice, not a compromise.
🔗 Read more: The Real Story Behind Corned Beef Row Baltimore: What’s Left and Why it Matters
Picking the Right Materials
Don't buy cheap MDF. Just don't.
If you’re investing in a 60-inch piece, the weight of the stone top is substantial. We're talking 150 to 250 pounds just for the quartz or marble. You need a solid wood frame—kiln-dried oak or birch—to handle that load without sagging over time.
- Quartz: Great for zero maintenance. It won't stain if you spill hair dye or nail polish remover.
- Marble: It’s classic but finicky. It will etch. If you like "patina," go for it. If you're a perfectionist, stay away.
- Teak or Walnut: If you're going for a Mid-Century Modern look, these woods bring warmth to a cold, tiled room.
The finish matters too. Look for "conversion varnish." It’s a chemical-resistant coating that prevents the humidity of the shower from peeling the paint off your vanity in three years. If the manufacturer doesn't list the finish type, it's probably just standard lacquer, which won't last.
Placement and Proportions
Where you put the sink on that 60-inch span changes everything.
- The Centered Sink: Traditional. It gives you equal "his and hers" sides of the counter, even if there's only one basin. It’s balanced and easy on the eyes.
- The Offset Sink: This is the pro move. By putting the sink on the far left or right, you create a massive, 40-inch-plus continuous counter on the other side. This is perfect for a "makeup vanity" setup where you can pull up a stool.
Lighting needs to follow the sink. If you offset the sink, don't center the light fixture over the middle of the vanity. Center it over the sink. It sounds obvious, but you'd be surprised how many contractors default to the center of the wall.
Common Mistakes to Avoid
Measurements are tricky. A "60-inch vanity" is rarely exactly 60.00 inches.
✨ Don't miss: How to Cut Bias Binding Strips Without Losing Your Mind
Often, the cabinet is 59 inches and the countertop overhang makes it 61. If you are wedging this into an alcove between two walls, you are going to have a bad time if you don't check the "spec sheet" for the exact dimensions.
Also, consider the backsplash. Most 60-inch units come with a matching 4-inch stone backsplash. If you’re planning on doing a full wall of mosaic tile, you might want to skip the stone splash for a cleaner look. Tell the supplier before they ship it; sometimes they're pre-attached with permanent epoxy.
The Installation Reality Check
You’re going to need a pro for the plumbing move. If you're switching from a 30-inch vanity to a 60-inch, or converting from a double to a single, the drain in the wall has to be centered correctly.
If the drain is 10 inches off-center, your drawers won't close.
Check your flooring too. If you’re replacing an old vanity, the tile might not go all the way under it. A 60-inch vanity usually sits on legs (furniture style) or a toe kick. If you pick a "floating" or wall-mounted single sink bathroom vanity 60, you better make sure your wall studs are reinforced with 2x6 blocking. That thing will rip the drywall right off the studs if it isn't anchored into solid timber.
🔗 Read more: Sparkle Silver Nail Polish: Why Most People Choose the Wrong Finish
Final Action Steps for Your Remodel
Don't just click "buy" on the first pretty picture you see on Wayfair or Pinterest.
Start by measuring your "swing." Open the bathroom door. Does it hit the vanity? If it does, you might need a "shallow depth" model. Standard depth is 21-22 inches, but you can find 18-inch models for tight spaces.
Next, confirm your plumbing. Take a photo of the pipes coming out of your wall and send them to the vanity manufacturer. Ask them: "Will this clear your drawer dividers?" It’s a five-minute email that saves a three-week return headache.
Lastly, think about the height. "Standard" used to be 30-32 inches. "Comfort height" is now 34-36 inches (the same as kitchen counters). If you’re tall, your back will thank you for going with a 36-inch tall 60-inch vanity.
Get the solid wood. Get the quartz. Get the single sink. You’ll appreciate the extra elbow room every single morning. Over-ordering the sink count is the most common regret in medium-sized bathroom renovations. Be the person who chose the counter space instead. It’s a decision that pays off every time you have more than one thing to put down.