AuthorTopic: .Connexion Bus [WIP] [ Isometric ]  (Read 3691 times)

Offline hiddddde

  • 0001
  • *
  • Posts: 31
  • Karma: +0/-0
    • View Profile

.Connexion Bus [WIP] [ Isometric ]

on: June 13, 2008, 03:22:14 pm
Hi guys,

It's a long while ago I posted in here. I think no one will know me xD
I tried to make a bus, that part went good, but then I came at the wheels. And that's one of my biggest issues ( If I say it good xD). I can't make Isometric wheels.
So I thought why not post it in here and maybe some of u guys have some tips

So here it is.
My bus xD


U can see the wheel is very small against the big bus. But how can I solve this?
Btw the bycicle was just a ref for the wheels, and this is the ref for the bus itself


Thanks ;)
Hidde

* Sorry for bad english guys  :-X
« Last Edit: June 13, 2008, 04:47:33 pm by hiddddde »

Offline hiddddde

  • 0001
  • *
  • Posts: 31
  • Karma: +0/-0
    • View Profile

Re: .Connexion Bus [WIP] [ Isometric ]

Reply #1 on: June 14, 2008, 11:12:06 am
Maybe no one got tips at this moment.
But I had some help on Pixeljoint and they showed me how to make a good wheel.

But I don't know if this shape of the wheel is good.

Offline Presley

  • 0001
  • *
  • Posts: 58
  • Karma: +0/-0
    • View Profile

Re: .Connexion Bus [WIP] [ Isometric ]

Reply #2 on: June 16, 2008, 09:19:34 am
May I ask why a Connexxion bus? Dutch pride is one thing, but the design is so uninspired.

I think you should reconsider the bus' actual shape before your continue further. Some of the proportion has been related differently in your pixel; most importantly the amount of bus behind the rear wheels and the width of the doors. The front of the bus also tapers back down towards the ground, the front bumper is not the furthest forward point.

Take a good look over the bus reference, you've missed a few things. Good luck with this piece, nice work so far.

Offline hiddddde

  • 0001
  • *
  • Posts: 31
  • Karma: +0/-0
    • View Profile

Re: .Connexion Bus [WIP] [ Isometric ]

Reply #3 on: June 19, 2008, 04:56:35 pm
May I ask why a Connexxion bus? Dutch pride is one thing, but the design is so uninspired.

I think you should reconsider the bus' actual shape before your continue further. Some of the proportion has been related differently in your pixel; most importantly the amount of bus behind the rear wheels and the width of the doors. The front of the bus also tapers back down towards the ground, the front bumper is not the furthest forward point.

Take a good look over the bus reference, you've missed a few things. Good luck with this piece, nice work so far.

I tried to get the good shape

I edited the front of it too, but I deleted the windows because it works better to edit the shape of it. I'll add them later when the shape is good

EDIT:

Added the wheels and made the place for the windows black
« Last Edit: June 19, 2008, 06:17:06 pm by hiddddde »