AuthorTopic: [C&C] Isometric STP logo  (Read 3644 times)

Offline The 7th Sin

  • 0001
  • *
  • Posts: 44
  • Karma: +0/-0
    • View Profile

[C&C] Isometric STP logo

on: June 26, 2010, 06:37:46 pm
Hello again chaps, this week I have been workin' on a logo for a blog.
My first draft:

I am going for a kind of "tronistic" grid look.

My second draft:

I tried connecting the letters and add arrows to create a more sleek look, but I am worried the arrows came out a little droopy. :/

Most recent draft:

I really appreciate your help WM, I worked on the angle the arrows face, and I think I ironed out most of the kinks.
I played around a bit with some light oranges and yellows, but the results looked too strange to me, I'll give it some time and come back to that part. ;)

As always if you see anything I have failed to mention, please feel free and give feedback! :)

Thanks in advance,
The 7th Sin
« Last Edit: June 27, 2010, 08:18:01 pm by The 7th Sin »

Offline The 7th Sin

  • 0001
  • *
  • Posts: 44
  • Karma: +0/-0
    • View Profile

Re: [C&C] Isometric STP logo

Reply #1 on: June 27, 2010, 04:59:40 pm
bump. ;)

Offline WM

  • 0010
  • *
  • Posts: 134
  • Karma: +0/-0
  • cubist
    • View Profile

Re: [C&C] Isometric STP logo

Reply #2 on: June 27, 2010, 06:37:04 pm


Make sure to line up the tips of the arrows with the rest.

Try breaking the monochromatic effect you have going on -- maybe use some yellows and/or oranges instead of those lighter blues.

Offline Kidfrommars

  • 0001
  • *
  • Posts: 34
  • Karma: +0/-0
  • My location? It's kinda obvious..
    • View Profile
    • RPG Land

Re: [C&C] Isometric STP logo

Reply #3 on: June 27, 2010, 07:44:03 pm
Looks nice. I agree with WM.

Offline The 7th Sin

  • 0001
  • *
  • Posts: 44
  • Karma: +0/-0
    • View Profile

Re: [C&C] Isometric STP logo

Reply #4 on: June 27, 2010, 08:19:18 pm
Bumping with a revised version.

Offline Anarkhya

  • 0001
  • *
  • Posts: 87
  • Karma: +0/-0
    • View Profile
    • Hello, this is what I do

Re: [C&C] Isometric STP logo

Reply #5 on: June 27, 2010, 11:01:04 pm
I tried to edit but ... your lightsources confuses me, I cant identify where they come from.

Offline The 7th Sin

  • 0001
  • *
  • Posts: 44
  • Karma: +0/-0
    • View Profile

Re: [C&C] Isometric STP logo

Reply #6 on: June 28, 2010, 03:04:12 pm
Mmm, I am going for a low front lit kind of look. (Imagine stage lighting)
The rules I am using for lighting are as follows:
Corners on the front of the piece will have a degree of shine to them.
Sides of the piece that are not directly lit will be counted as shadowed.
There is no top lighting on the piece.

I have fudged these rules a little in some of my edits, I think I'll try and give the lighting another go today. :)
I hope this is enough explanation to allow you critique accurately.