You’ve seen the ads. A sleek black puck glides across a pristine hardwood floor, dodging a stray sneaker and leaving a shimmering trail of clean behind it. It looks perfect. Too perfect.
Honestly, the eufy x10 pro omni robot vacuum and mop combo is one of those gadgets that sits in a weird spot in 2026. It’s not the most expensive "luxury" bot on the market, but it’s definitely not a budget pick either. Most people look at the 8,000 Pa suction or the dual spinning mops and think they’re getting a magic wand.
But magic wands don't need their dirty water tanks dumped or their sensors wiped down.
I’ve spent months watching this thing live in a house with two shedding dogs and a toddler who treats Cheerios like confetti. Here is the reality of living with the X10 Pro Omni—the good, the messy, and the stuff the marketing materials "sorta" forget to mention.
The 8,000 Pa Myth vs. Reality
Let’s talk about that suction number. 8,000 Pa sounds like it could lift a bowling ball. In the robot vacuum world, brands are currently in an arms race with numbers that mostly only matter on paper.
Does the eufy x10 pro omni robot vacuum and mop combo pick up pet hair? Yes. It’s actually incredible at it. The Pro-Detangle Comb hidden inside the brush roll is probably the most underrated part of the whole machine. I used to spend my Sunday mornings performing surgery on my old Roomba with a pair of scissors to get the hair out. With the X10, the "backward-and-forward" cleaning cycle at the station actually works. Most of the hair ends up in the bag, not wrapped around the axle.
However, if you have thick, high-pile carpets, don't expect it to replace your Dyson. It’s great for surface debris. It’s perfect for the "daily crumb." But for that deep-down, ground-in grit? You still need a corded vacuum once a week.
The Mopping: Pressure Matters
Most robot mops are just glorified wet wipes. They drag a damp cloth across the floor and call it a day.
The X10 Pro Omni is different because of the downward pressure. It applies about 1 kg (roughly 2.2 lbs) of force while those dual mops spin at 180 RPM.
- Dried coffee stains: Gone in one pass.
- Sticky juice spills: Usually takes two passes, but it gets there.
- Muddy paw prints: It eats them for breakfast.
The best part? The 12mm mop lift. If you have a mix of rugs and hardwood, this is a dealbreaker. The second the sensors detect carpet, the mops tuck themselves up like a turtle's head. Your rugs stay dry. Well, mostly dry. If you have those super shaggy, 70s-style rugs, 12mm might not be enough clearance. You’ve been warned.
Why AI.See is Both Genius and Paranoid
Eufy calls their obstacle avoidance "AI.See." It uses a camera and structured light to "see" the world.
💡 You might also like: Why the Brother Home 1982 HC-20 Still Matters to Retro Computing Nerds
It is scarily good at identifying things. It will literally put a little icon on your map that says "Shoes" or "Cables." It even has a built-in LED headlight, so if it’s cleaning under the couch in the dark, it won't get strangled by a stray USB cord.
But here’s the thing: it’s cautious. Almost too cautious.
If it sees a pattern on a rug that looks vaguely like a power cord, it might avoid that entire section of the room. I’ve had it refuse to clean near a black-and-white striped rug because it thought the stripes were obstacles. You can turn the sensitivity down in the app, but then you risk it eating a sock. It’s a delicate balance.
The "Omni" Station: Not Quite "Set and Forget"
The dock is the heart of the eufy x10 pro omni robot vacuum and mop combo. It empties the dust, washes the mops with clean water, and dries them with 45°C (113°F) air.
The drying part is critical. If you’ve ever used a robot mop that didn't have a dryer, you know that "wet dog" smell that eventually takes over your laundry room. The X10 keeps things fresh.
🔗 Read more: The Five Steps of Scientific Method: Why Most People Get It Backward
But "hands-off" is a relative term.
- The Dirty Water Tank: You have to empty this. And you have to do it often. If you let that dirty water sit for four days, opening that lid is like opening a portal to a swamp. It's gross.
- The Cleaning Tray: The bottom of the dock where the mops get scrubbed? It gets gunky. Mud and hair settle there. You’ll need to pull the tray out and rinse it in the sink every two weeks or so.
- The Water Supply: Depending on how much you mop, you’ll be refilling the clean tank every 2-3 days.
What the Pros Won't Tell You
Privacy is a big deal. Eufy had some drama a few years back with their cameras, and they’ve gone overboard to fix it here. The X10 processes all the "AI" images locally on the robot. Nothing goes to the cloud. You can even see the photos it takes of obstacles in the app (and then they get deleted). It’s nice to see why the vacuum didn't clean under the table—usually because someone left a Lego set out.
The noise is also worth noting. When it’s vacuuming, it’s fine. When it’s emptying the dustbin into the dock? It sounds like a jet engine taking off in your living room for about 15 seconds. Don't schedule it to "auto-empty" while you're on a Zoom call or trying to nap.
Comparing the X10 to the Giants
If you're looking at the eufy x10 pro omni robot vacuum and mop combo, you're likely also looking at Roborock or Dreame.
The Roborock S8 MaxV Ultra is "better" in terms of pure software polish and corner cleaning. But it also costs nearly double. The Dreame X40 has a side brush that extends out to reach corners.
The X10 is the "value king." It gives you 90% of the performance of a $1,400 robot for significantly less. It’s for the person who wants a clean house but refuses to spend two months' rent on a vacuum.
Actionable Steps for New Owners
If you decide to pull the trigger on the X10, don't just let it loose and hope for the best.
First, do a "recon" run. Clear the floor of anything really small—bobby pins, thin threads, or those tiny clear plastic toy ties. The AI can see a shoe, but it might miss a single needle.
Second, segment your rooms immediately. Use the eufy Clean app to divide your floor plan. I have my kitchen set to "Mop Only" with a "Deep" setting, while the living room is "Vacuum and Mop" on "Standard." This saves battery and water.
Third, buy the official cleaning solution. It’s tempting to throw some Mr. Clean in the tank. Don't. It can gunk up the internal pumps and void your warranty. The eufy solution is formulated to not create suds, which is what you want.
Lastly, check the "Edge Hugging" setting. It’s turned off by default to save battery, but if you have crumbs against your baseboards, you need it. The robot will literally swing its butt around to get the mops closer to the wall. It’s slow, but it works.
📖 Related: Shadow on the sun: Why those dark spots are actually terrifyingly hot
The X10 Pro Omni isn't perfect. No robot is. It’s a tool, and like any tool, it needs a little bit of love to keep it running. But compared to pushing a heavy upright vacuum every day? I'll take the occasional swamp-water tank any day of the week.
Check your firmware updates as soon as you plug it in. Eufy has been aggressive with software patches that improve the navigation logic, and the difference between the "out of the box" performance and the latest update is night and day. Once that's done, set your schedule and go enjoy your life. Your floors are handled.