Color Wow Dream Coat Supernatural Spray: Why Your Hair Still Frizzies After Using It

Color Wow Dream Coat Supernatural Spray: Why Your Hair Still Frizzies After Using It

You’ve seen the videos. Someone takes a glass of water, pours it over a sleek sheet of hair, and the droplets just roll off like they’re hitting a freshly waxed car. It’s mesmerizing. That is the promise of Color Wow Dream Coat Supernatural Spray. It’s basically the gold standard for anyone trying to survive 90% humidity without looking like a dandelion gone to seed. But honestly? A lot of people buy this bottle, spray it on, and then wonder why their hair still looks exactly the same.

The truth is that Dream Coat isn't a "set it and forget it" hairspray. It’s a chemical treatment disguised as a styling product. If you don't use it right, you’re essentially just spraying expensive water on your head.

What is Dream Coat Supernatural Spray actually doing?

Most anti-frizz products use oils or silicones to weigh the hair down. They’re heavy. They feel greasy by noon. Chris Appleton, the stylist behind Kim Kardashian’s glass hair, famously uses this because it does the opposite. It uses a heat-activated polymer—specifically, a complex called polysilicone-29.

When you apply this stuff, these polymers wrap around each hair strand. It’s like putting a microscopic raincoat on every single hair. But here is the kicker: that raincoat doesn't zip up unless you apply two things: tension and heat. Without a blow-dryer and a brush pulling the hair taut, the polymers just sit there. They don't cross-link. They don't seal.

The "No-Product" Feel

The weirdest thing about it is the texture. Usually, if a product works this well, you can feel it. You can feel the "gunk." With Dream Coat, your hair feels like... hair. Maybe even cleaner than usual. This is because the formula is remarkably thin. It’s water-based. It doesn’t have that slick, slippery feel of a serum. Because of that, people often under-apply it. They do two or three spritzes and call it a day. That is the first mistake. You have to saturate the hair. I mean really get in there.

The common mistakes that ruin the "Glass Hair" effect

If you’ve tried it and it failed, I can almost guarantee it’s because of one of these three things.

✨ Don't miss: Bed and Breakfast Wedding Venues: Why Smaller Might Actually Be Better

First: The Dampness Factor. Your hair shouldn't be dripping wet, but it can't be half-dry either. If you wait until your hair is 50% dry to apply Dream Coat, you’ve already lost. The hair cuticle is already starting to set. You need to apply it to towel-dried, damp hair so the polymers can distribute evenly before the drying process begins.

Second: The "Cocktail" Problem. This is a big one. Color Wow is very clear about this: Dream Coat works best when it is the only thing on your hair. If you put a heavy leave-in conditioner, an oil, or a styling cream underneath it, you are creating a barrier. The polymers can't "grab" the hair shaft. If you absolutely must use a leave-in because your ends are fried, keep it minimal and keep it at the very tips.

Third: The Blow-Dry Technique. You cannot air dry this. You cannot "rough dry" with just your fingers and a blow-dryer. You need a round brush or a paddle brush. You need tension. That pulling motion, combined with the heat of the dryer, is what triggers the "supernatural" part of the spray. It "stretches" the polymer into a smooth, hydrophobic film.

Is it safe for all hair types?

Technically, yes. But the results vary.

  • Fine Hair: This is a godsend for fine hair. Because it’s weightless, it won't kill your volume like a Moroccan oil might.
  • Curly Hair (Type 3 and 4): If you are trying to wear your hair curly, the standard Dream Coat Supernatural Spray isn't for you. It's designed for a smooth, blown-out look. However, the brand did release a "Curly" version that doesn't require heat, but that’s a completely different formula using different film-formers.
  • Color-Treated Hair: This is where the "Color Wow" brand started. The spray is sulfate-free, paraben-free, and specifically designed not to dull your highlights or turn your blonde yellow.

The Science of Humidity Resistance

We talk about "humidity-proof," but what does that mean? Hair is hygroscopic. That’s a fancy way of saying it loves to suck moisture out of the air. When the air is humid, the water molecules enter the hair shaft, causing it to swell and break the hydrogen bonds that keep it smooth.

🔗 Read more: Virgo Love Horoscope for Today and Tomorrow: Why You Need to Stop Fixing People

The polysilicone-29 in Dream Coat creates a seal that is so tight, water molecules literally bounce off. It’s not just a marketing claim; you can see it in lab tests. The moisture stays out, and the internal hydration stays in. This is also why the effect lasts through three or four shampoos. The polymer is "cured" onto the hair by the heat and doesn't just rinse off with plain water.

Why it lasts through 3-4 washes (and why sometimes it doesn't)

This is the "supernatural" claim that trips people up. If you use a very harsh, clarifying shampoo, you’re going to strip that coating off faster. If you use a gentle, sulfate-free shampoo (like the one Color Wow makes, obviously), the coating stays intact.

Don't expect it to look "just-blown-out" on day three without any effort. You might still need a quick touch-up with a flat iron or a brush. But the frizz resistance? That should stay. If you find your hair is frizzing up the next day, you probably didn't use enough product or enough heat during the initial application.

Comparing the original to the "Extra Strength" version

Recently, they launched an "Extra Strength" version. If you have extremely dehydrated, porous, or coily hair that you’re trying to press straight, the original might feel too light. The Extra Strength version adds more moisturizing elements. It’s beefed up.

For most people with "normal" frizz, the original is better because it’s impossible to overdo it. You could practically soak your head in the original and it won't look greasy. The Extra Strength requires a bit more caution—if you have fine hair and use the Extra Strength, you might end up with that limp, heavy look you were trying to avoid.

💡 You might also like: Lo que nadie te dice sobre la moda verano 2025 mujer y por qué tu armario va a cambiar por completo

A realistic look at the ingredients

Let's be real: this isn't an "all-natural" organic product. If you’re looking for a 100% botanical solution, keep moving.

  1. Water: The base.
  2. Dipropylene Glycol: Helps the ingredients penetrate and stay stable.
  3. Polysilicone-29: The star of the show. The humidity blocker.
  4. Silicone Quaternium-18: Adds conditioning without the weight of traditional silicones.

It’s a very clean, minimalist ingredient list for a high-performance styler. There are no alcohols that will dry your hair out, which is a common problem in other "frizz-freeze" sprays.

How to use it like a pro

If you want the best results, follow this specific order. Don't skip steps.

  1. Wash and condition: Use a residue-free shampoo. Anything that leaves "film" on the hair (like some heavy drugstore conditioners) will fight the spray.
  2. Towel dry: Get the dripping water out.
  3. Sectioning is mandatory: Do not just spray the top of your head. Divide your hair into at least four sections.
  4. Saturate: Spray each section liberally. Your hair should feel damp with the product. Comb it through to make sure every strand is coated.
  5. Blow-dry with a brush: Use a high-heat setting. Pull the hair tight with your brush as you dry. This is the "activation" phase.
  6. Optional Flat Iron: If you want that "liquid hair" look, finish with a flat iron. The extra heat will further seal the deal.

Actionable Next Steps

To get the most out of your bottle, start by checking your shampoo. If you are using a 2-in-1 or a very heavy "moisturizing" shampoo that leaves a coating, your Dream Coat won't work. Switch to a transparent, simple cleanser for your next wash.

When you apply the spray, don't be afraid to use a lot. Most people use about 1/4 of what they actually need. If you have medium-length hair, you should be doing 15-20 sprays minimum. Finally, ensure your blow-dryer nozzle is attached; it directs the heat and airflow downward, which helps smooth the cuticle in the direction of the hair growth. This small mechanical change makes a massive difference in how the polymers set.

If you live in a place like Florida or Houston, this isn't just a styling product—it's a survival tool. Just remember: heat and tension are the keys. Without them, it's just a bottle of expensive mist.